Source for table saw switch?

I bought a used Craftsman table saw from which the owner had removed the on-off power outlet switch. Sears parts says this part is no longer available. Does anyone know of an after-market or used parts source for these? My saw is model no. 113.298761; the original power outlet switch was mounted very conveniently--right up front, hanging from the front rip fence guide bar; the switch operates a receptacle that the 3-prong motor plug goes into. I would particularly like to locate one of these, or a substitute that could hang about this same place. Thanks, Gary I have used a J box and a standard light switch as a replacment for power tool switchs cheap and readly availible from woodcraft.com http://www.woodcraft.com/family.aspx?familyid=5002 hope it helps... I have the same model... Love it. Another one: http://woodworker.com/cgi-bin/FULLPR...ARTNUM=907-134 This is really helpful. Thanks a lot. -Gary Originally Posted by mango man I have used a J box and a standard light switch as a replacment for power tool switchs cheap and readly availible Ditto here, on my older model Craftsman, 103,20000 circa 1950's

Related Posts:

• 
  Table saw motor needed
  
  Table saw motor neededI have a Craftsmann table saw, model number 137.248880. The motor is shot and I need a replacement. The motor model number is RM871, 15 Amp, 5000 RPM. Thanks in advance for y...
  


• 
  Very hot dimmer switch
  
  Very hot dimmer switchI just wired 6 6 recessed can lights (65 watts) with a three way dimmer switch and a three way toggle switch. Everything works perfect, however, when the dimmer is set high a...
  


• 
  Wiring help on pumptrol pressure switch
  
  Wiring Help On Pumptrol Pressure SwitchJust bought a new pressure switch because one of the points (contacts?) looked a little worn and burned. Am trying to install this new one myself, because of...
  


• 
  Water source heat pump climatemasters problem
  
  Water Source Heat Pump (Climatemasters) problem.I have a condo-Apartment in a High-rise building built in 2003. My condo is equipped with 2 water source AC unit (ClimateMasters with CMX/DMx contro...
  


• 
  Rudd ugph10ebrjb pressure switch questions
  
  RUDD UGPH-10EBRJB Pressure switch questionsMy furnace doesn't fire up. It is a RUDD UGPH-10EBRJB If I tap on what I think is the pressure switch, it starts working. I pulled the 2 wires off of the...