Keep your Luminette privacy sheers clean.
Luminette Privacy Sheers are manufactured by Hunter Douglas. The sheers are 100-percent polyester and are designed to be static free and dust resistant. Hunter Douglas recommends regular cleaning to keep them looking good and operating well. Routine cleaning and spot cleaning are procedures you can do on your own, but a full cleaning requires a professional cleaning service that will use an injection and extraction or ultrasonic cleaning method.
Instructions
General Cleaning
1. Leave the curtains hanging while cleaning them. Put on disposable gloves before handling the sheers.
2. Dust the sheers with a feather duster for routine, light dusting.
3. Vacuum the sheers with a hand-held vacuum set on a low setting. Vacuum from the upper left-hand corner using short horizontal movements until you reach the opposite side of the sheer. Start again at the left-hand side and move in the same motion. Repeat until the entire sheer has been vacuumed.
Spot Cleaning
4. Put on disposable gloves.
5. Pour a small amount of stain treatment solution onto one of the white cloths.
6. Hold one white cloth behind the sheer where the spot is located. Gently blot the stain from the front with the stain treatment solution. Do not rub the sheer with the cloth.
7. Allow the sheer to air dry.
8. Dampen a new clean cloth. Place another dry, clean cloth behind the treated area and blot the stain from the front with the wet cloth to remove any remaining stain treatment solution.
Tips Warnings
Never dry clean Luminette sheers. Whenever handling Luminette sheers, do not pull, tug or rub the sheers at any time or you may cause puckering. When vacuuming, do not use any attachments. Do not use electrostatic cleaning products on the sheers, and do not put any cleaning solution or water on or in the Luminette headrail.
